001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
054
055
056
057
058
059

#rcpsp61.py 場所取り実績確認(415個)
from optseq import *
import math
#=======================================================================
prob=Model()
CS=["CS","CC","SS","SC"]
#=======================================================================
#リソースの定義（usuki）
file_path = 'RCPSP_u.res.txt'
with open(file_path, 'r', encoding='utf-8') as file:
    prog=file.read()
exec(prog)
#=======================================================================
#データセットの定義（S01）
# data_BC1, data_BC2, data_BC3, data_BC4, data_BC5, data_BC6, data_BC7
file_path = 'RCPSP6_data_all.txt'
with open(file_path, 'r', encoding='utf-8') as file:
    prog=file.read()
exec(prog)
#=======================================================================
data={}
data.update(data_BC1); 
data.update(data_BC2); 
data.update(data_BC3); 
data.update(data_BC4); 
data.update(data_BC5); 
data.update(data_BC6); 
data.update(data_BC7);
#-----
def extact(data):
    w=[]
    for i in data.keys():
        if data[i][1]>=0:  w.append(i)
    return w
#-----
idata_BC1=extact(data_BC1)
idata_BC2=extact(data_BC2)
idata_BC3=extact(data_BC3)
idata_BC4=extact(data_BC4)
idata_BC5=extact(data_BC5)
idata_BC6=extact(data_BC6)
idata_BC7=extact(data_BC7)
idata=idata_BC1+idata_BC2+idata_BC3+idata_BC4+idata_BC5+idata_BC6+idata_BC7
#print(len(idata))     
#=======================================================================
def L1L2B1B2lb(R,data,i,j,no):
    no1=data[i][j][no][0]; #j=6,7
    L=R[no1][1]; B=R[no1][2];
    l=math.floor(data[i][8][0]); b=math.floor(data[i][8][1]);   
    L1=data[i][j][no][1]; L2=data[i][j][no][2]; 
    if L1<0: l=l-abs(L1); L1=0;
    if L2>L: l=l-abs(L2-L); L2=L;         
    B1=data[i][j][no][3]; B2=data[i][j][no][4];   
    if B1<0: b=b-abs(B1); B1=0
    if B2>B: b=b-abs(B2-B); B2=B;  
    ll=L2-L1; bb=B2-B1; 
    if L2-L1>l: ll=l 
    if B2-B1>b: bb=b  
    return [no1,L1,L2,B1,B2,ll,bb] 

060
061
062
063
064
065
066
067
068
069
070
071
072
073
074
075
076
077
078
079
080
081
082
083
084
085
086
087
088
089
090
091
092
093
094
095
096
097
098
099
100
101
102
103
104
105
111
112
113
114
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134

#=======================================================================   
iwhich=1 #場所取り実績確認(415個)
if iwhich==1: #rcpsp71_1.csv
    idata=[]
    for i in data.keys():
        if data[i][1]<0: #<0,==-1,-2
            idata.append(i)
#-----------------------------------------------------------------------
#[1.1]作業の定義
#-----------------------------------------------------------------------
    act={}
    for i in idata:    
        if data[i][6]!=0:    
            act[i]=prob.addActivity(data[i][0])
#-----------------------------------------------------------------------
#[1.2]先行制約
#-----------------------------------------------------------------------
   #----－日程固定
    for i in idata:
        if data[i][6]!=0:    
            prob.addTemporal("source",act[i],tempType="SS",delay= data[i][3])       
            prob.addTemporal(act[i],"source",tempType="SS",delay=-data[i][3])           
#-----------------------------------------------------------------------
#[1.4]資源制約（作業場所）      
#-----------------------------------------------------------------------
    mode={}
    for i in idata:      
        if data[i][6]!=0:
            for no in range(len(data[i][6])): 
                w=L1L2B1B2lb(R,data,i,6,no)
                no1,L1,L2,B1,B2,l,b=w[0],w[1],w[2],w[3],w[4],w[5],w[6]
               #L1=0; L2=R[no1][1]; B1=0; B2=R[no1][2];  
               #L1=0; B1=0;
                skipL=1; skipB=1;
                for j in range(L1,L2-l+1,skipL): 
                    for k in range(B1,B2-b+1,skipB):     
                        mode[i,no1,j,k]=Mode(\
                        "mode["+i+"]_R[{0:03d}][{1:03d}_{2:03d}][{3:03d}_{4:03d}]"\
                        .format(no1,j,k,l,b),duration=data[i][2])
                        for s in range(0,l):
                            for t in range(0,b):
                                mode[i,no1,j,k].addResource(res3PL[no1,j+s,k+t],1) 
                        mode[i,no1,j,k].addResource(res2S[no1],l*b)
                        act[i].addModes(mode[i,no1,j,k])       
        else:
            mode[i]=Mode("mode["+i+"]",duration=data[i][2]) 
            act[i].addModes(mode[i])     
#-----------------------------------------------------------------------
#[1.5]問題求解  
#-----------------------------------------------------------------------
    A=[]
    for a in prob.act: A.append(a.name) 
   #print("アクティビティ:",A)  
    N=len(prob.act)
    print("アクティビティ総数（含待機数）:",N)  
    M=[]
    for a in prob.act: M.append(len(a.modes)) 
    #print("モード数:",M)  
    print("平均モード数:",round(sum(M)/N))
    P=math.ceil(math.log10(round(sum(M)/N)**N))
    print("問題の規模: 10**",P)                        
#-----------------------------------------------------------------------
   #prob.Params.Makespan=Ture
   #prob.Params.Initial=False
   #prob.Params.OutputFlag=False
   #prob.Params.Neighborhood=20
   #prob.Params.RandomSeed=1
    prob.Params.TimeLimit=10
    prob.optimize()
    filename="rcpsp61.csv"
   #print("writing "+filename) 
    prob.writeExcel(filename)   
#sys.exit()  
#=======================================================================
#eof

135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
211
212
213
214
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270

#rcpsp62a.py 実績の日程計画と定盤計画の下で配員計画が可能か？ (プッシュ型)
 :
#=======================================================================   
iwhich=2 #実績の日程計画と定盤計画の下で配員計画が可能か？ (プッシュ型)
if iwhich==2: 
#=======================================================================
    wplace=[]    #計画上の待機なし
   #wplace=idata #計画上の待機あり   
#-----------------------------------------------------------------------
#[2.1]作業の定義
#-----------------------------------------------------------------------
    act={}
    print("*** push in [2] ***") 
    for i in data:
        if data[i][1]>=0:
            act[i]=prob.addActivity(data[i][0])
        else:
            act[i]=prob.addActivity("場所_for_"+i) 
    # print("*** pull in [1]***") 
    # for i in data:
    #     if data[i][1]>=0:
    #         act[i]=prob.addActivity(data[i][0],duedate=98,backward=True)  
    #     else:
    #         act[i]=prob.addActivity("場所_for_"+i)             
#-----------------------------------------------------------------------
#[2.2]先行制約
#-----------------------------------------------------------------------
    for i in  data:
        for iw in [0,1,2,3,4]:
            if data[i][4][iw] in idata:
                prob.addTemporal(act[i],act[data[i][4][iw]], tempType=CS[data[i][5][iw][0]], delay=data[i][5][iw][1])                
   #----－日程固定
    for i in data:
   # 0搭載, 2入荷, 6入ブ, 7出ブ, 9合体, 1開始, 3正, 4反, 5出棟, 8運搬,       
        if data[i][1] in [-2,-1,0,2,6,7,9,1,3,4,5,8]:     
            prob.addTemporal("source",act[i],tempType="SS",delay= data[i][3])   
            prob.addTemporal(act[i],"source",tempType="SS",delay=-data[i][3])          
#-----------------------------------------------------------------------
#[2.3]資源制約（配員） 
#-----------------------------------------------------------------------   
    mode={}
    wno1=0;wno2=0;wno3=0;wno4=0;wno5=0;wno6=0;wno7=0
    for i in idata:
   #10 F #11 W #12 C #13 CC #15 鉄艤 #16 甲配 #17 機配 #18 内塗 #19 外塗   
        if data[i][1] in [10,12,11,13,15,16,17,18,19]: 
            hours=10
            n=math.ceil(data[i][9]/hours)  #１人で何日かかるか
            mode[i]=Mode("mode["+i+"]",duration=n)
            mode[i].addBreak(0,"inf",maxtime=10)   
            if data[i][1] in [10,12]:      #取付28人
                mode[i].addResource(res1W[1],{(0,n):hours})
                if n>7 : mode[i].addParallel(1,n,8)      
                else:    mode[i].addParallel(1,n,4)                    
                wno1+=1
            elif data[i][1] in [11,13]:    #溶接43人
                mode[i].addResource(res1W[2],{(0,n):hours})
                if n>11 : mode[i].addParallel(1,n,12)      
                else:     mode[i].addParallel(1,n,8)                  
                wno2+=1
            elif data[i][1] in [15]:       #鉄艤装5人
                mode[i].addResource(res1W[4],{(0,n):hours})
                if n>2 : mode[i].addParallel(1,n,5)      
                else:    mode[i].addParallel(1,n,3)   
                wno3+=1
            elif data[i][1] in [16]:       #甲板配管7人
                mode[i].addResource(res1W[5],{(0,n):hours})
                if n>6 : mode[i].addParallel(1,n,7)      
                else:    mode[i].addParallel(1,n,4)          
                wno4+=1
            elif data[i][1] in [17]:       #機関配管5人
                mode[i].addResource(res1W[6],{(0,n):hours})
                if n>14: mode[i].addParallel(1,n,5)      
                else:    mode[i].addParallel(1,n,3)  
                wno5+=1
            elif data[i][1] in [18]:       #塗装12人
                mode[i].addResource(res1W[3], {(0,n):hours})
                if n>8 : mode[i].addParallel(1,n,9)      
                else:    mode[i].addParallel(1,n,8)        
                wno6+=1
            elif data[i][1] in [19]:       #塗装12人
                mode[i].addResource(res1W[3], {(0,n):hours})
                if n>3 : mode[i].addParallel(1,n,8)      
                else:    mode[i].addParallel(1,n,4)        
                wno6+=1                
            act[i].addModes(mode[i])       
   # 0搭載, 1開始, 2入荷, 3正, 4反, 5出棟, 6入ブ, 7出ブ, 8運搬, 9合体; 14ダミー
        else:
            mode[i]=Mode("mode["+i+"]",duration=data[i][2]) 
            act[i].addModes(mode[i])              
    print(wno1,wno2,wno3,wno4,wno5,wno6) 
#-----------------------------------------------------------------------
#[2.4]資源制約（作業場所）      
#-----------------------------------------------------------------------
   #----- 作業場所    
    for i in data:
        if data[i][1] in [-1,-2] and data[i][6]!=0:
            ii=i[0:11]+"0"
            for no in range(len(data[i][6])):  
                w=L1L2B1B2lb(R,data,i,6,no)
                no1,L1,L2,B1,B2,l,b=w[0],w[1],w[2],w[3],w[4],w[5],w[6]
               #L1=0; L2=R[no1][1]; B1=0; B2=R[no1][2]; #点->面のとき 
                skipL=1; skipB=1;        
                for j in range(L1,L2-l+1,skipL): 
                    for k in range(B1,B2-b+1,skipB):
                        mode[i,no1,j,k]=Mode("mode["+ii+"]1_R[{0:03d}][{1:03d}_{2:03d}][{3:03d}_{4:03d}]".format(no1,j,k,l,b),duration=data[i][2]) 
                        for s in range(0,l):
                            for t in range(0,b):
                                mode[i,no1,j,k].addResource(res3PL[no1,j+s,k+t],1)       
                                mode[i,no1,j,k].addResource(res2S[no1],l*b)                                                            
                        act[i].addModes(mode[i,no1,j,k])   
#-----------------------------------------------------------------------
#[2.5]問題求解
#-----------------------------------------------------------------------
    A=[]
    for a in prob.act: A.append(a.name) 
   #print("アクティビティ:",A)  
    N=len(prob.act)
    print("アクティビティ総数（含待機数）:",N)  
    M=[]
    for a in prob.act: M.append(len(a.modes)) 
   #print("モード数:",M)  
    print("平均モード数:",round(sum(M)/N))
    P=math.ceil(math.log10(round(sum(M)/N)**N))
    print("問題の規模: 10**",P)                        
#-----
   #prob.Params.Makespan=Ture
   #prob.Params.Initial=False
   #prob.Params.OutputFlag=False
   #prob.Params.Neighborhood=20
   #prob.Params.RandomSeed=1
    prob.Params.TimeLimit=300  #100 or 300
    prob.optimize()
    filename="rcpsp62a.csv"
   #print("writing "+filename) 
    prob.writeExcel(filename) 
#sys.exit()
#=======================================================================
#eof

135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
211
212
213
214
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273

#rcpsp62b.py 実績の日程計画と定盤計画の下で配員計画が可能か？ (プル型)
 :
#=======================================================================   
iwhich=2 #実績の日程計画と定盤計画の下で配員計画が可能か？ (プッシュ型)
if iwhich==2: 
#=======================================================================
    wplace=[]    #計画上の待機なし
   #wplace=idata #計画上の待機あり   
#-----------------------------------------------------------------------
#[2.1]作業の定義
#-----------------------------------------------------------------------
    act={}
    # print("*** push in [2] ***") 
    # for i in data:
    #     if data[i][1]>=0:
    #         act[i]=prob.addActivity(data[i][0])
    #     else:
    #         act[i]=prob.addActivity("場所_for_"+i) 
    print("*** pull in [1]***") 
    for i in data:
        if data[i][1]>=0:
            act[i]=prob.addActivity(data[i][0],duedate=98,backward=True)  
        else:
            act[i]=prob.addActivity("場所_for_"+i)             
#-----------------------------------------------------------------------
#[2.2]先行制約
#-----------------------------------------------------------------------
    for i in  data:
        for iw in [0,1,2,3,4]:
            if data[i][4][iw] in idata:
                prob.addTemporal(act[i],act[data[i][4][iw]], tempType=CS[data[i][5][iw][0]], delay=data[i][5][iw][1])                
   #----－日程固定
    for i in data:
   # 0搭載, 2入荷, 6入ブ, 7出ブ, 9合体, 1開始, 3正, 4反, 5出棟, 8運搬,       
        # if data[i][1] in [-2,-1,0,2,6,7,9,1,3,4,5,8]:     
        #     prob.addTemporal("source",act[i],tempType="SS",delay= data[i][3])   
        #     prob.addTemporal(act[i],"source",tempType="SS",delay=-data[i][3])     
        if data[i][1] in [-2,-1,0,2,6,7,9]:     
            prob.addTemporal("source",act[i],tempType="SS",delay= data[i][3])   
            prob.addTemporal(act[i],"source",tempType="SS",delay=-data[i][3])             
#-----------------------------------------------------------------------
#[2.3]資源制約（配員） 
#-----------------------------------------------------------------------   
    mode={}
    wno1=0;wno2=0;wno3=0;wno4=0;wno5=0;wno6=0;wno7=0
    for i in idata:
   #10 F #11 W #12 C #13 CC #15 鉄艤 #16 甲配 #17 機配 #18 内塗 #19 外塗   
        if data[i][1] in [10,12,11,13,15,16,17,18,19]: 
            hours=10
            n=math.ceil(data[i][9]/hours)  #１人で何日かかるか
            mode[i]=Mode("mode["+i+"]",duration=n)
            mode[i].addBreak(0,"inf",maxtime=10)   
            if data[i][1] in [10,12]:      #取付28人
                mode[i].addResource(res1W[1],{(0,n):hours})
                if n>7 : mode[i].addParallel(1,n,8)      
                else:    mode[i].addParallel(1,n,4)                    
                wno1+=1
            elif data[i][1] in [11,13]:    #溶接43人
                mode[i].addResource(res1W[2],{(0,n):hours})
                if n>11 : mode[i].addParallel(1,n,12)      
                else:     mode[i].addParallel(1,n,8)                  
                wno2+=1
            elif data[i][1] in [15]:       #鉄艤装5人
                mode[i].addResource(res1W[4],{(0,n):hours})
                if n>2 : mode[i].addParallel(1,n,5)      
                else:    mode[i].addParallel(1,n,3)   
                wno3+=1
            elif data[i][1] in [16]:       #甲板配管7人
                mode[i].addResource(res1W[5],{(0,n):hours})
                if n>6 : mode[i].addParallel(1,n,7)      
                else:    mode[i].addParallel(1,n,4)          
                wno4+=1
            elif data[i][1] in [17]:       #機関配管5人
                mode[i].addResource(res1W[6],{(0,n):hours})
                if n>14: mode[i].addParallel(1,n,5)      
                else:    mode[i].addParallel(1,n,3)  
                wno5+=1
            elif data[i][1] in [18]:       #塗装12人
                mode[i].addResource(res1W[3], {(0,n):hours})
                if n>8 : mode[i].addParallel(1,n,9)      
                else:    mode[i].addParallel(1,n,8)        
                wno6+=1
            elif data[i][1] in [19]:       #塗装12人
                mode[i].addResource(res1W[3], {(0,n):hours})
                if n>3 : mode[i].addParallel(1,n,8)      
                else:    mode[i].addParallel(1,n,4)        
                wno6+=1                
            act[i].addModes(mode[i])       
   # 0搭載, 1開始, 2入荷, 3正, 4反, 5出棟, 6入ブ, 7出ブ, 8運搬, 9合体; 14ダミー
        else:
            mode[i]=Mode("mode["+i+"]",duration=data[i][2]) 
            act[i].addModes(mode[i])              
    print(wno1,wno2,wno3,wno4,wno5,wno6)
#-----------------------------------------------------------------------
#[2.4]資源制約（作業場所）      
#-----------------------------------------------------------------------
   #----- 作業場所    
    for i in data:
        if data[i][1] in [-1,-2] and data[i][6]!=0:
            ii=i[0:11]+"0"
            for no in range(len(data[i][6])):  
                w=L1L2B1B2lb(R,data,i,6,no)
                no1,L1,L2,B1,B2,l,b=w[0],w[1],w[2],w[3],w[4],w[5],w[6]
               #L1=0; L2=R[no1][1]; B1=0; B2=R[no1][2]; #点->面のとき 
                skipL=1; skipB=1;        
                for j in range(L1,L2-l+1,skipL): 
                    for k in range(B1,B2-b+1,skipB):
                        mode[i,no1,j,k]=Mode("mode["+ii+"]1_R[{0:03d}][{1:03d}_{2:03d}][{3:03d}_{4:03d}]".format(no1,j,k,l,b),duration=data[i][2]) 
                        for s in range(0,l):
                            for t in range(0,b):
                                mode[i,no1,j,k].addResource(res3PL[no1,j+s,k+t],1)       
                                mode[i,no1,j,k].addResource(res2S[no1],l*b)                                                            
                        act[i].addModes(mode[i,no1,j,k])   
#-----------------------------------------------------------------------
#[2.5]問題求解
#-----------------------------------------------------------------------
    A=[]
    for a in prob.act: A.append(a.name) 
   #print("アクティビティ:",A)  
    N=len(prob.act)
    print("アクティビティ総数（含待機数）:",N)  
    M=[]
    for a in prob.act: M.append(len(a.modes)) 
   #print("モード数:",M)  
    print("平均モード数:",round(sum(M)/N))
    P=math.ceil(math.log10(round(sum(M)/N)**N))
    print("問題の規模: 10**",P)                        
#-----
   #prob.Params.Makespan=Ture
   #prob.Params.Initial=False
   #prob.Params.OutputFlag=False
   #prob.Params.Neighborhood=20
   #prob.Params.RandomSeed=1
    prob.Params.TimeLimit=300  #100 or 300
    prob.optimize()
    filename="rcpsp62b.csv"
   #print("writing "+filename) 
    prob.writeExcel(filename) 
#sys.exit()
#=======================================================================
#eof